Key Advantages

-3-Ton Rated Support Capacity
The product is specified as a 3T jack stand for supporting compatible vehicle loads during maintenance. Always check the manufacturer's rating label to confirm whether the 3-ton capacity applies to one stand or a complete set, and never exceed the stated rating.

-Dedicated Support After Vehicle Lifting
Designed to support a stationary vehicle after it has been raised using a suitable hydraulic jack. Unlike a lifting jack, the stand provides a separate support point for maintenance work when positioned correctly.

-Stable Support on Suitable Ground
The stand transfers the supported vehicle load through its base to the ground. Using it on a hard, flat and level surface, with the saddle correctly aligned to an approved support point, is essential for stable support.

-Compatible with Garage Maintenance Workflows
Can be used alongside a suitably rated floor jack or garage jack. After lifting the vehicle, the stand is placed beneath an approved support point and the vehicle is carefully lowered onto it before servicing begins.

-Useful for Multiple Automotive Service Tasks
Supports suitable maintenance operations including wheel inspection, brake servicing, suspension inspection and underbody maintenance. The correct number of stands, support locations and rated capacity must be selected for the vehicle and repair procedure.

Broad Range of Applications
-Passenger Car Maintenance, Compatible Vehicle Support, Automotive Repair Workshops, Garage Servicing, Wheel Inspection, Brake Service, Suspension Inspection, Underbody Maintenance, Vehicle Inspection, Automotive Safety Support


核心优点

-3吨额定支撑能力
产品标示为3T千斤顶安全支架，适用于符合承重要求的车辆维修支撑工作。使用前须确认厂家铭牌上的3吨承重是指单个支架还是整套支架，并严格遵守额定承重限制。

-专为车辆顶升后的支撑设计
用于车辆通过合适的液压千斤顶升高后提供静态支撑。与负责升高车辆的千斤顶不同，安全支架在正确放置的情况下可为后续维修工作提供独立支撑点。

-正确放置可提供稳定支撑
支架通过底座将车辆重量传递至地面。必须在坚固、平坦及水平的地面上使用，并确保顶部支撑位置与车辆指定支撑点正确对齐，以保持支撑稳定。

-方便搭配车房千斤顶进行维修
可与额定承重合适的卧式千斤顶或车房液压千斤顶配合使用。车辆升高后，将支架放置在指定支撑位置，再小心将车辆重量转移到支架上，之后才开始维修。

-辅助多种汽车检修与保养工作
可用于符合条件的车轮检查、刹车保养、悬挂系统检查及汽车底盘维修等工作。必须根据车辆重量、支撑位置及维修要求，选用数量及额定承重合适的安全支架。

适用范围广阔
-乘用车保养、适合的车辆支撑、汽车维修车间、车房维修、车轮检查、刹车保养、悬挂系统检查、汽车底盘维修、车辆检查、汽车维修安全支撑